1080E26 FUEL VAPOUR CUT OUT VALVE FROM FILTER - R.R. - Lancia - THESIS - eLearn

214210 - 1080E26 FUEL VAPOUR CUT OUT VALVE FROM FILTER - R.R.

) - Position the vehicle on the lift. See in Op. 5530B10 BATTERY - R.R.- Make sure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-). See in Op. 4450B10 Front WHEEL (one) - R.R.- [7055B39] See in Op. 1080E20 active charcoal filter for fuel vapours - r + r1. Disconnect the electrical connection from the fuel vapour cut out solenoid valve.

	Description	Connector
1	Fuel vapour recovery solenoid valve	L010

2. Disconnect the pipes and remove the fuel vapour cut out solenoid valve from the filter.

Refitting ( Removing

) - Place the fuel vapour cut out solenoid valve back in its housing and connect the pipes.- Connect the electrical connection to the fuel vapour cut out solenoid valve.

	Description	Connector
.	Fuel vapour recovery solenoid valve	L010

See in Op. 1080E20 active charcoal filter for fuel vapours - r + r- [7055B39] See in Op. 4450B10 Front WHEEL (one) - R.R.- Connect the negative battery terminal (-).- Remove the vehicle from the lift.