78678 - 3340B56 RIGID PIPE from hydraulic CONTROL UNIT to RIGHT FRONT BRAKE - R.R.

Removing ( Refitting )     See in Op. 3340A12 A.B.S. hydraulic and electronic CONTROL UNIT - R.R. - Includes bleeding air    See in Op. 1004B17 POWER UNIT with automatic transmission, complete with support frame, front suspension- R.R. for versions with air conditioning-1. Undo the connector (1a), remove the spring (1b) and release the flexible section of the brake pipe from the rigid section.
1. Release the rigid pipe (1b) from the retaining bands (1a) on the engine compartment bulkhead and remove it without damaging it.
Refitting ( Removing ) - Position the pipe securing it to the retaining bands on the engine compartment bulkhead.- Connect the flexible section of the brake pipe to the rigid section.- Tighten the connector fixing the rigid section to the flexible section to torque.
Value - daNmFasteningComponentØ  
.1.4ConnectorBRAKING SYSTEM PIPE BRAKESM10
- [1004B17]    See in Op. 3340A12 A.B.S. hydraulic and electronic CONTROL UNIT - R.R. - Includes bleeding air