126644 - 7040L37 GEAR LEVER SURROUNDING TRIM - R.R.

Removing ( Refitting ) - Open the boot and disconnect the negative battery terminal.- If necessary, release the non-slip mat from the housing in the tunnel.1. Release the trim from the gear lever surround.2. Release the surrounding trim from the housing in the tunnel cover.

work carefully to avoid damaging the switch holder trim.

3. Disconnect the electrical connectors for the sun visor (3a) control switch and the ASR switch and the parking sensor belonging to the switch unit on the tunnel (3b).4. Undo the bolts fixing the switches to the gear lever surrounding trim.- Remove the switches. Refitting ( Removing ) - Fit the switches in the gear lever surrounding trim tightening the fixing bolts.- Connect the electrical connectors for the sun blind control switch and the ASR and parking sensor switches.- Fit the gear lever surrounding trim in the housing in the tunnel cover pressing the retaining trims until they are fastened.- Fit the trim from the gear lever surround.- If it has been removed, position the non-slip mat in the housing on the tunnel.- Connect the negative battery terminal.