174250 - 4130B80 Rigid pipe from heat exchanger to fluid reservoir - R.R. includes bleeding air
Removing
(
Refitting
)
See in Op. 4410D10 Front suspension FRAME - R.R.- Proceed with removing the front suspension frame without dismantling the chassis components at the bench; carry out the appropriate operation.1. Undo the connector on the power assisted steering box.2. Undo the bolt fixing the supply pipe to the power steering box.3. Remove the supply pipe from the power steering pump to the steering box.4. Undo the nuts fixing the pipe to the power assisted steering box.5. Working on the bands (5a) disconnect the flexible pipes to the power assisted steering box (5b) and to the duplex pipe.6. Remove the supply pipe from the reservoir to the heat exchanger rigid pipe.
1. Working on the retaining band (1a), disconnect the Duplex flexible pipe (1b) from the rigid pipe.2. Undo the fixing nuts.3. Remove the rigid pipe from the heat exchanger to the reservoir.
Refitting
(
Removing
)
- Fit the rigid pipe from the heat exchanger to the reservoir.- Tighten the nuts fixing the pipe to the power assisted steering box.- Connect the flexible Duplex pipe to the rigid pipe.- Fit the supply pipe from the reservoir to the heat exchanger rigid pipe.- Fit the supply pipe from the power steering pump to the steering box.- Tighten the bolt fixing the supply pipe to the power steering box.- Tighten the connector on the power assisted steering box to torque. See in Op. 4410D10 Front suspension FRAME - R.R.- Proceed with refitting the front suspension frame; carry out the appropriate operation.
Removing
(
Refitting
)
See in Op. 4410D10 Front suspension FRAME - R.R.- Proceed with removing the front suspension frame without dismantling the chassis components at the bench; carry out the appropriate operation.
1. Undo the connector on the power assisted steering box.2. Undo the bolt fixing the supply pipe to the power steering box.3. Remove the supply pipe from the power steering pump to the steering box.4. Undo the nuts fixing the pipe to the power assisted steering box.5. Working on the bands (5a) disconnect the flexible pipes to the power assisted steering box (5b) and to the duplex pipe.6. Remove the supply pipe from the reservoir to the heat exchanger rigid pipe.
