184782 - 1020D08 FRONT crankshaft oil seal COVER - R.R. and replace seals with timing belt(s) removed for versions with automatic transmission

Refitting

    See in Op. 4450B04 Right FRONT WHEEL (one) - R.R.    See in Op. 7055B64 Engine compartment DUST SEAL in front wheel arch (one), left or right - R.R.    See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.    See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.    See in Op. 1048A21 AIR INLET HOSE FROM INTAKE TO FILTER - R.R.    See in Op. 1048A28 vacuum air circuit resonator pipe - r+r    See in Op. 1008C10 Power unit REACTION ROD - Replace    See in Op. 1048A11 COMPLETE AIR FILTER -R.R.    See in Op. 1092G10 Engine components single drive BELT - R.R.    See in Op. 1072B50 Air CHAMBER - R.R.    See in Op. 2710A31 INTERMEDIATE DRIVE SHAFT - R.R.    See in Op. 1084B30 CARTRIDGE ENGINE OIL FILTER -R.R.    See in Op. 1076B84 EXHAUST PIPE BETWEEN RIGHT PRECONVERTER AND CATALYTIC CONVERTER - R.R.    See in Op. 1080B39 RIGHT CATALYTIC PRECONVERTER - R.R. or Replace Gasket    See in Op. 1020A20 CRANKCASE SUMP - R.R. clean contact surfaces and apply sealant    See in Op. 1008A44 RIGID REAR power unit MOUNTING - R.R.1. Undo the lower bolt fixing the alternator mounting.2. Remove the toothed drive pulley3. Undo the bolts (3a) and remove the crankshaft oil seal front cover (3b) complete with oil seal.- Remove the gasket.

- Remove the oil seal from the crankshaft front oil seal cover. Refitting ( Removing ) - Fit the crankshaft oil seal front cover complete with a new gasket and tighten the bolts to the recommended torque.

	Value - daNm	Fastening	Component	Ø
.	0.9	Bolt	FRONT COVER CRANKSHAFT	M6

1. Fit a new oil seal (1a) using the tool (1b).

	Description	Code	Function
1b	Fitting tool	1.860.949.000	Tool for fitting crankshaft front oil seal

- Fit the toothed drive pulley- Fit the lower bolt fixing the alternator mounting.    See in Op. 1008A44 RIGID REAR power unit MOUNTING - R.R.    See in Op. 1020A20 CRANKCASE SUMP - R.R. clean contact surfaces and apply sealant    See in Op. 1080B39 RIGHT CATALYTIC PRECONVERTER - R.R. or Replace Gasket    See in Op. 1076B84 EXHAUST PIPE BETWEEN RIGHT PRECONVERTER AND CATALYTIC CONVERTER - R.R.    See in Op. 1084B30 CARTRIDGE ENGINE OIL FILTER -R.R.    See in Op. 2710A31 INTERMEDIATE DRIVE SHAFT - R.R.    See in Op. 1072B50 Air CHAMBER - R.R.    See in Op. 1092G10 Engine components single drive BELT - R.R.    See in Op. 1048A11 COMPLETE AIR FILTER -R.R.    See in Op. 1008C10 Power unit REACTION ROD - Replace    See in Op. 1048A28 vacuum air circuit resonator pipe - r+r    See in Op. 1048A21 AIR INLET HOSE FROM INTAKE TO FILTER - R.R.    See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.    See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.    See in Op. 7055B64 Engine compartment DUST SEAL in front wheel arch (one), left or right - R.R.    See in Op. 4450B04 Right FRONT WHEEL (one) - R.R.    See in Op. 7055B42 FRONT WHEEL ARCH LINER (one), left or right - R.R.- Connect the negative battery lead, then close the boot.- Remove the vehicle from the lift.    See in Op. 0010T10 ENGINE OIL - Change