186880 - 1036E10 CAMSHAFTS in left cylinder head - R.R. on vehicle

Refitting

- Raise the vehicle on the lift.    See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.    See in Op. 7055B64 Engine compartment DUST SEAL in front wheel arch (one), left or right - R.R.    See in Op. 7055B42 FRONT WHEEL ARCH LINER (one), left or right - R.R.-    See in Op. 1092G10 Engine components single drive BELT - R.R.- Lower the lift.    See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.    See in Op. 1088B10 Engine coolant SUPPLY RESERVOIR - R.R.    See in Op. 1048A21 AIR INLET HOSE FROM INTAKE TO FILTER - R.R.    See in Op. 1048A28 vacuum air circuit resonator pipe - r+r    See in Op. 1008C10 Power unit REACTION ROD - Replace    See in Op. 1016A42 LEFT CYLINDER HEAD IGNITION COIL COVER - R.R.    See in Op. 1048A11 COMPLETE AIR FILTER -R.R.    See in Op. 1032B10 TOOTHED timing BELT - R.R. for timing adjustment or replacement    See in Op. 1032B58 DRIVEN TOOTHED PULLIES    See in Op. 1032C32 TIMING BELT FIXED TENSIONER - R.R.1. Undo the bolts (1a) and remove the left rear timing belt guard (1b).2. Undo the bolts (2a) and remove the left cylinder head camshaft caps (2b).3. Remove the left cylinder head camshafts complete with front oil seals.

Refitting ( Removing ) - Fit the camshafts on the left cylinder head.- Fit the camshaft caps and secure them tightening the bolts to the recommended torque.

	Value - daNm	Fastening	Component	Ø
.	1.9	Bolt	CAMSHAFT CAPS	M8

1. Fit the front oil seals (1a) for the left cylinder head camshafts using the tool (1b).

	Description	Code	Function
1b	Fitting tool	1.860.948.000	Camshaft front oil seal

- Fit the left rear timing belt guard and secure it using the bolts.    See in Op. 1032C32 TIMING BELT FIXED TENSIONER - R.R.    See in Op. 1032B58 DRIVEN TOOTHED PULLIES    See in Op. 1032B10 TOOTHED timing BELT - R.R. for timing adjustment or replacement    See in Op. 1048A11 COMPLETE AIR FILTER -R.R.    See in Op. 1016A42 LEFT CYLINDER HEAD IGNITION COIL COVER - R.R.    See in Op. 1008C10 Power unit REACTION ROD - Replace    See in Op. 1048A28 vacuum air circuit resonator pipe - r+r    See in Op. 1048A21 AIR INLET HOSE FROM INTAKE TO FILTER - R.R.    See in Op. 1008B10 FLEXIBLE MOUNTING for power unit front support (timing side) - Replace    See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.- Raise the lift.    See in Op. 1092G10 Engine components single drive BELT - R.R.    See in Op. 7055B42 FRONT WHEEL ARCH LINER (one), left or right - R.R.    See in Op. 7055B64 Engine compartment DUST SEAL in front wheel arch (one), left or right - R.R.    See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.- Lower the vehicle on the lift.    See in Op. 4450B04 Right FRONT WHEEL (one) - R.R.- Connect the negative battery lead, then close the boot.    See in Op. 0010T20 Engine REFRIGERANT FLUID - Change- Remove the vehicle from the lift.