187482 - 1080B93 RIGHT LAMBDA SENSOR - R.R.

Removing ( Refitting )     See in Op. 1016A34 Right TAPPET COVER - R.R. and Replace gasket1. Open the container (1a) cover and disconnect the connector (1b).
DescriptionConnector
1b Lambda sensor on catalyzerK017
1. Using the USAG 875 spanner or an equivalent tool, undo the Lambda sensor and remove it complete with wiring.
DescriptionConnector
1 Lambda sensor on catalyzerK017
Refitting ( Removing ) - Position the Lambda sensor and tighten it to the recommended torque.
DescriptionConnector
.Lambda sensor on catalyzerK017
Value - daNmFasteningComponentØ  
.5.8ConnectorLAMBDA PROBE (ONE)M18 X 1.5
- Connect the connector for the Lambda sensor and close the protective cover.    See in Op. 1016A34 Right TAPPET COVER - R.R. and Replace gasket