5580A88 WIRING BETWEEN BRAKING SYSTEM CHECK CONTROL UNIT AND ACTUATOR ON BRAKE SERVO - R.R. - Lancia - THESIS - eLearn

193024 - 5580A88 WIRING between BRAKING SYSTEM CHECK CONTROL UNIT and ACTUATOR on brake servo - R.R.

) - Open the boot, remove the cover on the left hand side and disconnect the negative battery lead. See in Op. 1048A28 1. Disconnect the electrical connections at the brake servo for the diaphragm position sensor (1a) for the brake servo actuator (1b).

1. Disconnect the connectors (1a) and (1b) for the braking system check control unit (1c) and remove the wiring.

	Description	Connector
1a	Braking system check control unit (NBA brake assistance)	M052

	Description	Connector
1b	Braking system check control unit (NBA brake assistance)	M052

Refitting ( Removing

) - Position the wiring and connect the connectors and the braking system check control unit and remove the actual control unit.

	Description	Connector
1a	Braking system check control unit (NBA brake assistance)	M052

	Description	Connector
1b	Braking system check control unit (NBA brake assistance)	M052

- Disconnect the electrical connections at the brake servo for the diaphragm position sensor (2a) for the brake servo actuator (2b). See in Op. 1048A28 - Connect the negative battery terminal and position the cover on the left hand side of the luggage compartment.