210228 - 1032B55 LEFT HEAD TOOTHED DRIVEN PULLIES - R.R. FOR VERSIONS WITH AIR CONDITIONING

Refitting

    See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.    See in Op. 7055B64 Engine compartment DUST SEAL in front wheel arch (one), left or right - R.R.    See in Op. 7055B42 FRONT WHEEL ARCH LINER (one), left or right - R.R.    See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.    See in Op. 1092G10 Engine components single drive BELT - R.R.    See in Op. 1016A42 LEFT CYLINDER HEAD IGNITION COIL COVER - R.R.    See in Op. 1072B50 Air CHAMBER - R.R.    See in Op. 5510C14 Ignition COILS - R.R.    See in Op. 1016A36 Left and right TAPPET COVERS - R.R.    See in Op. 1088B10 Engine coolant SUPPLY RESERVOIR - R.R.    See in Op. 1048A21 AIR INLET HOSE FROM INTAKE TO FILTER - R.R.    See in Op. 1048A28 vacuum air circuit resonator pipe - r+r    See in Op. 1008C10 Power unit REACTION ROD - Replace    See in Op. 1016A42 LEFT CYLINDER HEAD IGNITION COIL COVER - R.R.    See in Op. 1048A11 COMPLETE AIR FILTER -R.R.    See in Op. 1092A10 Crankshaft PULLEY - R.R. for versions with air conditioner    See in Op. 1088C24 Water pump PULLEY - R.R. with timing belt removed    See in Op. 1032B10 TOOTHED timing BELT - R.R. for timing adjustment or replacement1. Undo the bolts (1a) for the left head toothed driven pullies, using the tool (1b) for counter-torque.

	Description	Code	Function
1b	Support for counter-torque	1.860.831.000	Support

1. Remove the left head toothed driven pullies (1a) using the tool (1b).

	Description	Code	Function
1b	Extractor	1.860.954.000	-

Refitting ( Removing ) - Fit the left head toothed driven pullies and secure them without tightening the bolts.    See in Op. 1032B10 TOOTHED timing BELT - R.R. for timing adjustment or replacement    See in Op. 1088C24 Water pump PULLEY - R.R. with timing belt removed    See in Op. 1092A10 Crankshaft PULLEY - R.R. for versions with air conditioner    See in Op. 1048A11 COMPLETE AIR FILTER -R.R.    See in Op. 1016A42 LEFT CYLINDER HEAD IGNITION COIL COVER - R.R.    See in Op. 1008C10 Power unit REACTION ROD - Replace    See in Op. 1048A28 vacuum air circuit resonator pipe - r+r    See in Op. 1048A21 AIR INLET HOSE FROM INTAKE TO FILTER - R.R.    See in Op. 1088B10 Engine coolant SUPPLY RESERVOIR - R.R.    See in Op. 1016A36 Left and right TAPPET COVERS - R.R.    See in Op. 5510C14 Ignition COILS - R.R.    See in Op. 1072B50 Air CHAMBER - R.R.    See in Op. 1016A42 LEFT CYLINDER HEAD IGNITION COIL COVER - R.R.    See in Op. 1092G10 Engine components single drive BELT - R.R.    See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.    See in Op. 7055B42 FRONT WHEEL ARCH LINER (one), left or right - R.R.    See in Op. 7055B64 Engine compartment DUST SEAL in front wheel arch (one), left or right - R.R.    See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.    See in Op. 4450B04 Right FRONT WHEEL (one) - R.R.- Connect the negative battery lead, then close the boot.- Remove the vehicle from the lift.    See in Op. 0010T21 ENGINE COOLANT - Check density and top up if necessary- [PR0010T21]