213464 - 1036E15 Right cylinder head CAMSHAFTS - R.R. on vehicle for versions with air conditioning

Refitting

    See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.    See in Op. 7055B64 Engine compartment DUST SEAL in front wheel arch (one), left or right - R.R.    See in Op. 7055B42 FRONT WHEEL ARCH LINER (one), left or right - R.R.    See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.    See in Op. 1092G10 Engine components single drive BELT - R.R.    See in Op. 1016A42 LEFT CYLINDER HEAD IGNITION COIL COVER - R.R.    See in Op. 1072B50 Air CHAMBER - R.R.    See in Op. 5510C14 Ignition COILS - R.R.    See in Op. 1016A36 Left and right TAPPET COVERS - R.R.    See in Op. 1088B10 Engine coolant SUPPLY RESERVOIR - R.R.    See in Op. 1048A21 AIR INLET HOSE FROM INTAKE TO FILTER - R.R.    See in Op. 1048A28 vacuum air circuit resonator pipe - r+r    See in Op. 1008C10 Power unit REACTION ROD - Replace    See in Op. 1016A42 LEFT CYLINDER HEAD IGNITION COIL COVER - R.R.    See in Op. 1048A11 COMPLETE AIR FILTER -R.R.    See in Op. 1092A10 Crankshaft PULLEY - R.R. for versions with air conditioner    See in Op. 1088C24 Water pump PULLEY - R.R. with timing belt removed    See in Op. 1032B10 TOOTHED timing BELT - R.R. for timing adjustment or replacement    See in Op. 1032C32 TIMING BELT FIXED TENSIONER - R.R.1. Undo the bolts (1a) and remove the right cylinder head camshaft caps (1b).2. Remove the right cylinder head camshafts complete with front oil seals.

Refitting ( Removing ) - Fit the camshafts on the right cylinder head.- Fit the camshaft caps and secure them tightening the bolts to the recommended torque.

	Value - daNm	Fastening	Component	Ø
.	1.9	Bolt	CAMSHAFT CAPS	M8

- Fit the front oil seals (1a) for the left cylinder head camshafts using the tool (1b).

	Description	Code	Function
1b	Fitting tool	1.860.948.000	Camshaft front oil seal

- Fit the left rear timing belt guard and secure it using the bolts.    See in Op. 1032C32 TIMING BELT FIXED TENSIONER - R.R.    See in Op. 1032B10 TOOTHED timing BELT - R.R. for timing adjustment or replacement    See in Op. 1088C24 Water pump PULLEY - R.R. with timing belt removed    See in Op. 1092A10 Crankshaft PULLEY - R.R. for versions with air conditioner    See in Op. 1048A11 COMPLETE AIR FILTER -R.R.    See in Op. 1016A42 LEFT CYLINDER HEAD IGNITION COIL COVER - R.R.    See in Op. 1008C10 Power unit REACTION ROD - Replace    See in Op. 1048A28 vacuum air circuit resonator pipe - r+r    See in Op. 1048A21 AIR INLET HOSE FROM INTAKE TO FILTER - R.R.    See in Op. 1088B10 Engine coolant SUPPLY RESERVOIR - R.R.    See in Op. 1016A36 Left and right TAPPET COVERS - R.R.    See in Op. 5510C14 Ignition COILS - R.R.    See in Op. 1072B50 Air CHAMBER - R.R.    See in Op. 1016A42 LEFT CYLINDER HEAD IGNITION COIL COVER - R.R.    See in Op. 1092G10 Engine components single drive BELT - R.R.    See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.    See in Op. 7055B42 FRONT WHEEL ARCH LINER (one), left or right - R.R.    See in Op. 7055B64 Engine compartment DUST SEAL in front wheel arch (one), left or right - R.R.    See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.    See in Op. 4450B04 Right FRONT WHEEL (one) - R.R.- Connect the negative battery lead, then close the boot.- Remove the vehicle from the lift.    See in Op. 0010T21 ENGINE COOLANT - Check density and top up if necessary-