354728 - M05 ONE OF THE FRONT WINDOW MECHANISMS DOES NOT DETECT AN OBSTACLE

If an obstacle located between the glass and the upper outer casing whilst it is closing, the glass does not stop immediately or change direction.

If an obstacle is detected the change of direction stage lasts around 300 ms.

STEP	OPERATIONS TO BE CARRIED OUT	TEST RESULTS
1	CHECK USING DIAGNOSTIC EQUIPMENT	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Connect the diagnostic equipment (Examiner or Examiner plus) to the diagnostic socket: that there are no errors in the Driver's Door control unit concerned	Move on to Step	Presence of errors in the door node concerned	Continue following the instructions in the diagnostic table
2	ELECTRICAL SYSTEM CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check: the condition of the connection between the door node concerned and the safety device (Wiring Diagram ) E3050 FRONT ELECTRIC WINDOWS	Move on to Step	Connections interrupted	Restore the connections (Wiring Diagram ) E3050 FRONT ELECTRIC WINDOWS
3	CHECK ON CORRECT OPERATION	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check that the fault is no longer present		Fault persists	Replace the safety device outer casing    See in Op. 7005D18 Front side door DESCENDING WINDOW GLASS CHANNEL (one), left or right - r r