367993 - J06 WHEN THE WINDSCREEN WASHER IS OPERATED THE RECIRCULATION DOES NOT COME ON AUTOMATICALLY (SMELL OF DETERGENT IN THE PASSENGER COMPARTMENT)

STEP	OPERATIONS TO BE CARRIED OUT	TEST RESULTS
1	CHECK USING DIAGNOSTIC EQUIPMENT	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Using the diagnostic equipment (Examiner or other instruments) connected, check the following information at the CAN network: no control unit inactive; no faulty control units; no control units with faulty CAN line;	Move on to Step	Presence of faults	Continue following the instructions in the diagnostic table
2	ELECTRICAL SYSTEM CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check the continuity/insulation between the windscreen wiper control on the stalk and the body computer (Wiring Diagram ) E3022 HEADLAMP WASHER	Move on to Step	Electrical connection faulty	Restore the electrical connection (Wiring Diagram ) E3022 HEADLAMP WASHER
3	CONTROL MODULE ON STALK UNIT OPERATIONAL CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check that the windscreen wiper controls on the stalk unit are working properly    Continue following the instructions in the test 5550AB Check on windscreen wiper and headlamp washer control operation on steering column switch unit	Move on to Step	Control module on stalk unit faulty	Replace the steering column switch unit    See in Op. 5550A12 complete stalk unit - r+r for versions with air bag
4	CHECK ON CORRECT OPERATION	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check that the fault is no longer present		Fault persists	Replace body computer    See in Op. 5505A32 BODY COMPUTER - R.R.