| STEP | OPERATIONS TO BE CARRIED OUT | TEST RESULTS |
|---|
| 1 | CHECK USING DIAGNOSTIC EQUIPMENT | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Connect the Examiner diagnostic equipment to the diagnostic connector and check the following at the Connect Nodein errors ambient | Move on to Step | Presence of faults | Continue following the instructions for the diagnostic equipment |
| 2 | ELECTRICAL SYSTEM CHECK | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Remove the Connect and check:- the effective connection of the aerial connector.
Remove the roof panel, identify the diversity module and check- for the presence of a positive supply coming from the Connect.
- the continuity/insulation of the aerial lead (Wiring Diagram ) E3510 RADIO
| Move on to Step | 1. Aerial connector disconnected | 1. Reconnect the aerial connector. |
| 2. No positive supply at the diversity module | Move on to Step |
| 3. Aerial lead broken/not insulated | 3. Replace the aerial lead. |
| 3 | ELECTRICAL SYSTEM CHECK | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Check the continuity/insulation of the supply lead from the Connect to the diversity module (Wiring Diagram ) E3510 RADIO | Move on to Step | Electrical connection faulty | Restore the electrical connection (Wiring Diagram ) E3510 RADIO |
| 4 | COMPONENT CHECK | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Check the condition of the aerials at the rearscreen | Move on to Step | Aerials broken | Replace the rearscreen See in Op. 7035B14 Rearscreen (bonded) GLASS - R.R. for Replacement - Includes cleaning housing in bodyshell |
| 5 | CHECK ON CORRECT OPERATION | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Check that the fault is no longer present | | Fault persists | Replace the diversity module |
| 6 | CHECK ON CORRECT OPERATION | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Check that the fault is no longer present | | Fault persists | Replace the Connect module See in Op. 5580P20 CONNECT CONTROL UNIT - R.R. |