74607 - 1008A46 Power unit RIGID MOUNT - TIMING side - R&R

Refitting

    See in Op. 1088B10 Engine coolant SUPPLY RESERVOIR - R.R.    See in Op. 1008C10 Power unit REACTION ROD - Replace    See in Op. 4450B04 Right FRONT WHEEL (one) - R.R.    See in Op. 1088E10 Radiator cooling FAN - R.R.    See in Op. 5040A10 Air conditioning coolant circuit - Drying and Repressurizing- Raise the vehicle on the lift.    See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.    See in Op. 7055B64 Engine compartment DUST SEAL in front wheel arch (one), left or right - R.R.    See in Op. 7055B42 FRONT WHEEL ARCH LINER (one), left or right - R.R.    See in Op. 1092G10 Engine components single drive BELT - R.R.    See in Op. 1032B10 TOOTHED timing BELT - R.R. for timing adjustment or replacement    See in Op. 1008C16 BRACKET on BODY for reaction link - R.R.    See in Op. 5040A20 Air conditioning COMPRESSOR - R.R. - Includes fluid level check and top up if necessary- Position a hydraulic jack under the engine sump1. Undo the nuts (1a) fixing the support (1b) to the cylinder block/crankcase.

1. Undo the bolt (1a) fixing the reinforcement bracket (1b) between the power assisted steering pump and the support.2. Undo the nut (2a) fixing the support (2b) to the flexible mounting and, after having raised the jack as much as necessary, remove the support from the engine compartment side.

Refitting ( Removing ) - Position the support and tighten the fixing nut to the recommended torque.

	Value - daNm	Fastening	Component	Ø
.	4,5	Nut	FRONT FLEXIBLE MOUNTING BLOCKS, POWER UNIT	M10X1.25

- Tighten the bolt fixing the reinforcement bracket between the power assisted steering pump and the support.

	Value - daNm	Fastening	Component	Ø
.	2.2	Bolt	POWER STEERING PUMP SUPPORT/BRACKET	M8

- Tighten the nuts fixing the support to the cylinder block/crankcase to the recommended torque.

	Value - daNm	Fastening	Component	Ø
.	2.2	Nut	FRONT FLEXIBLE MOUNTING BLOCKS, POWER UNIT	M8

- Remove the hydraulic jack.    See in Op. 5040A20 Air conditioning COMPRESSOR - R.R. - Includes fluid level check and top up if necessary    See in Op. 1008C16 BRACKET on BODY for reaction link - R.R.    See in Op. 1032B10 TOOTHED timing BELT - R.R. for timing adjustment or replacement    See in Op. 1092G10 Engine components single drive BELT - R.R.    See in Op. 7055B42 FRONT WHEEL ARCH LINER (one), left or right - R.R.    See in Op. 7055B64 Engine compartment DUST SEAL in front wheel arch (one), left or right - R.R.    See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.- Lower the vehicle.    See in Op. 5040A10 Air conditioning coolant circuit - Drying and Repressurizing    See in Op. 1088E10 Radiator cooling FAN - R.R.    See in Op. 4450B04 Right FRONT WHEEL (one) - R.R.    See in Op. 1008C10 Power unit REACTION ROD - Replace    See in Op. 1088B10 Engine coolant SUPPLY RESERVOIR - R.R.    See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.- Connect the negative battery terminal and position the cover on the left hand side of the luggage compartment.- Remove the vehicle from the lift.