75225 - 1084A42 Engine oil pressure warning light SWITCH - R.R.

Removing ( Refitting ) - Position the vehicle on a lift.- Open the boot and disconnect the negative battery terminal.    See in Op. 4450B04 Right FRONT WHEEL (one) - R.R.    See in Op. 7055B64 Engine compartment DUST SEAL in front wheel arch (one), left or right - R.R.1. Disconnect the electrical connection for the switch.
DescriptionConnector
1 Insufficient engine oil pressure sensorK030
2. Using a 21 mm 235 1/2" L USAG bush (or an equivalent tool), undo the sensor and remove it.
Refitting ( Removing ) - Tighten the sensor to the recommended torque.
Value - daNmFasteningComponentØ  
.2.4ConnectorINSUFFICIENT ENGINE OIL PRESSURE SWITCHM14X1,5
- Connect the electrical connection for the switch.
DescriptionConnector
Insufficient engine oil pressure sensorK030
    See in Op. 7055B64 Engine compartment DUST SEAL in front wheel arch (one), left or right - R.R.    See in Op. 4450B04 Right FRONT WHEEL (one) - R.R.- Connect the negative battery lead, then close the boot.- Remove the vehicle from the lift.