75270 - 1088B10 Engine coolant SUPPLY RESERVOIR - R.R.

Removing ( Refitting ) - Open the boot, remove the cover on the left hand side and disconnect the negative battery lead.    See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.- Drain the engine coolant tank using a suitable syringe.1. Disconnect the electrical connection for the engine coolant level.
DescriptionConnector
1 Engine coolant level sensorK026
2. Open the band (2a) and disconnect the coolant return pipe (2b) from the thermostat unit, then lift up the tank (2c).3. Open the retaining band (3a) and disconnect the coolant supply pipe (3b) from the engine coolant tank (3c), then remove the tank.
Refitting ( Removing ) - Close the band retaining the coolant pipe, then position the tank.- Connect the coolant return pipe from the thermostat unit to the tank and close the retaining band.- Connect the electrical connection for the engine coolant level sensor.
DescriptionConnector
.Engine coolant level sensorK026
    See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.- Connect the negative battery lead, then close the boot.    See in Op. 0010T21 ENGINE COOLANT - Check density and top up if necessary- [0010T21]