79704 - 5580C40 sensor for side bag (one) lh or rh r r
 | Before carrying out the operations described below, the following preliminary operations must be carried out: (1) turn the ignition key to the OFF position; (2) disconnect and insulate the battery leads; (3) wait for 10 minutes before continuing. |
Removing
(
Refitting
)
See in Op. 7040H36 CENTRE PILLAR TRIM LOWER ELEMENT (one), left or right - R.R. See in Op. 7040H38 CENTRE PILLAR TRIM UPPER ELEMENT (one), left or right - R.R.1. Undo the fixing bolts (1a) and disconnect the electrical connector (1b). | Description | Connector |
|---|---|---|
| 1b | Sensor for driver's Air Bag | K066 |
| Description | Connector |
|---|---|---|
| 1b | Sensor for passenger Air Bag | K067 |
Refitting
(
Removing
)
- Check that the sensor is not damaged.1. Position the sensor in the housing.2. Tighten the fixing bolts.3. Connect the electrical connector. | Description | Connector |
|---|---|---|
| 3 | Sensor for driver's Air Bag | K066 |
| Description | Connector |
|---|---|---|
| 3 | Sensor for passenger Air Bag | K067 |
