113700 - 7030B45 DRIVE CABLE (one), left or right - R.R. with sun roof assembly removed

Removing ( Refitting ) 1. Acting on the retaining springs (1a) remove the water drainage channel (1b). 1. Undo the fixing bolts (1a) and remove the sunroof motor (1b). 1. Release the end of travel mounting on both sides. 1. Release the slide (1a) from the housing in the direction shown by the arrow and then release it from the drive cable (1b).- Release the drive cable and remove it. Refitting ( Removing ) - Check the condition of each individual component.1. Fit the drive cable (1a) in the housing and secure it to the slide (1b).- Place the slide in the end of travel position, until it is in the "tilted" position. 1. Fit the end of travel mounting on both sides. - Position the motor and secure it using the bolts.- Position the water drainage channel in the housing until the click of the retaining springs is heard.