184865 - 1024B20 ENGINE FLYWHEEL - R&R for versions with automatic transmission

Removing ( Refitting ) - Position the vehicle on a lift.    See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.    See in Op. 5040A10 Air conditioning coolant circuit - Drying and Repressurizing- Open the boot, remove the cover on the left hand side and disconnect the negative battery lead.    See in Op. 4450B04 Right FRONT WHEEL (one) - R.R.    See in Op. 4450B02 Left FRONT WHEEL (one) - R.R.    See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.    See in Op. 7055B64 Engine compartment DUST SEAL in front wheel arch (one), left or right - R.R.- Left and right sides    See in Op. 7055B42 FRONT WHEEL ARCH LINER (one), left or right - R.R.- Left and right sides    See in Op. 7210E10 FRONT BUMPER    See in Op. 1016A40 Ignition COIL COVER on cylinder head - R.R.    See in Op. 1048A21 AIR INLET HOSE FROM INTAKE TO FILTER - R.R.    See in Op. 1048A23 Cold AIR INTAKE for air filter - R.R.    See in Op. 1048A28 vacuum air circuit resonator pipe - r+r    See in Op. 1048A10 COMPLETE AIR FILTER -R.R.    See in Op. 1076B68 EXHAUST PIPE FLEXIBLE SECTION - R.R.    See in Op. 1004B17 POWER UNIT with automatic transmission, complete with support frame, front suspension- R.R. for versions with air conditioning    See in Op. 1004D13 POWER UNIT (automatic transmission) with support frame assembly, front suspension removed - Separation and reassembly    See in Op. 1004D20 POWER UNIT (automatic transmission), removed - Separate and reassemble1. Fit the flywheel lock.
DescriptionCodeFunction
1 Counter-torque1.860.846.000Engine flywheel lock
2. Undo the bolts (2a) and remove the engine flywheel (2b0 complete with bracket securing it to the torque converter.
Refitting ( Removing ) - Place the flywheel in its housing and secure it by tightening the bolts to the recommended torque.
Value - daNmFasteningComponentØ  
.16BoltFLYWHEELM12X23.5
- Remove the flywheel lock
DescriptionCodeFunction
.Counter-torque1.860.846.000Engine flywheel lock
    See in Op. 1004D20 POWER UNIT (automatic transmission), removed - Separate and reassemble    See in Op. 1004D13 POWER UNIT (automatic transmission) with support frame assembly, front suspension removed - Separation and reassembly    See in Op. 1004B17 POWER UNIT with automatic transmission, complete with support frame, front suspension- R.R. for versions with air conditioning    See in Op. 1076B68 EXHAUST PIPE FLEXIBLE SECTION - R.R.    See in Op. 1048A10 COMPLETE AIR FILTER -R.R.    See in Op. 1048A28 vacuum air circuit resonator pipe - r+r    See in Op. 1048A23 Cold AIR INTAKE for air filter - R.R.    See in Op. 1048A21 AIR INLET HOSE FROM INTAKE TO FILTER - R.R.    See in Op. 1016A40 Ignition COIL COVER on cylinder head - R.R.    See in Op. 7210E10 FRONT BUMPER    See in Op. 7055B42 FRONT WHEEL ARCH LINER (one), left or right - R.R.- Left and right sides    See in Op. 7055B64 Engine compartment DUST SEAL in front wheel arch (one), left or right - R.R.- Left and right sides    See in Op. 4450B02 Left FRONT WHEEL (one) - R.R.    See in Op. 4450B04 Right FRONT WHEEL (one) - R.R.    See in Op. 0010T70 POWER ASSISTED STEERING FLUID - Replace    See in Op. 0010T44 AUTOMATIC TRANSMISSION FLUID - Change- Connect the negative battery lead, then close the boot.    See in Op. 0010T20 Engine REFRIGERANT FLUID - Change    See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.    See in Op. 5040A10 Air conditioning coolant circuit - Drying and Repressurizing- Remove the vehicle from the lift.