190174 - 2130A74 Flexible water return pipe to crankcase between rigid pipe and automatic transmission fluid heat exchanger

Refitting

    See in Op. 1016A40 Ignition COIL COVER on cylinder head - R.R.    See in Op. 1048A21 AIR INLET HOSE FROM INTAKE TO FILTER - R.R.    See in Op. 1048A23 Cold AIR INTAKE for air filter - R.R.    See in Op. 1048A28 vacuum air circuit resonator pipe - r+r    See in Op. 1048A10 COMPLETE AIR FILTER -R.R.- Raise the vehicle on the lift.    See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.- Position a suitable container for collecting the engine coolant.1. Open the band (1a) on the automatic transmission fluid heat exchange and the bands (1c) on the cylinder block/crankcase coolant return pipe connector.2. Remove the cylinder block/crankcase water supply pipe from the automatic trnasmission fluid heat exchanger draining the coolant into the container positioned previously.

Refitting ( Removing ) - Connect the cylinder block/crankcase water return pipe to the automatic transmission heat exchanger using the band and fasten it.- Connect the connector to the cylinder block/crankcase coolant return pipe, then close the retaining bands.    See in Op. 1048A10 COMPLETE AIR FILTER -R.R.    See in Op. 1048A28 vacuum air circuit resonator pipe - r+r    See in Op. 1048A23 Cold AIR INTAKE for air filter - R.R.    See in Op. 1048A21 AIR INLET HOSE FROM INTAKE TO FILTER - R.R.    See in Op. 1016A40 Ignition COIL COVER on cylinder head - R.R.    See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.- Connect the negative battery terminal.    See in Op. 0010T21 ENGINE COOLANT - Check density and top up if necessary    See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.- Remove the vehicle from the lift.