209677 - 2135B74 ELECTRONIC AUTOMATIC GEARBOX OUTPUT RPM SENSOR - R.R.

Removing ( Refitting ) - Position the vehicle on a lift.- Make sure that the ignition key is in the OFF position, then open the boot, remove the cover on the left hand side and disconnect the negative battery lead.1. Disconnect the electrical connection tfrom the electronic automatic transmission output rpm sensor.
DescriptionConnector
1 Rpm sensorK046
2. Undo the bolt (2a) and remove the automatic transmission rpm output sensor (2b).
Refitting ( Removing ) - Place the electronic automatic transmission ouput rpm sensor back in its housing and tighten it to the recommended torque.
Value - daNmFasteningComponentØ  
.-BoltAUTOMATIC GEARBOX INPUT RPM SENSOR ELECTR.-
- Connect the electrical connection to the electronic automatic transmission output rpm sensor.
DescriptionConnector
.Rpm sensorK046
- Connect the negative battery lead, then close the boot.- Remove the vehicle from the lift.