495394 - 2110D26 DIFFERENTIAL INTERNAL HOUSING BEARINGS - REPLACE WITH DIFFERENTIAL INTERNAL HOUSING REMOVED

Removing ( Refitting ) - Position the differential internal housing in a vice fitted with protective jaws.1. Remove the front bearing (1a) using tools (1b), (1c) and (1d).
DescriptionCodeFunction
1b Extractor1.840.005.001Removing front bearing
DescriptionCodeFunction
1c Hoists1.840.005.301Removing front bearing
DescriptionCodeFunction
1d Clamp for hoists1.840.005.400Removing front bearing
2. Remove the speedometer drive gear.
1. Remove the rear bearing (1a) using tools (1b), (1c) and (1d).
DescriptionCodeFunction
1b Extractor1.840.005.001Removing front bearing
DescriptionCodeFunction
1c Hoists1.840.005.301Removing front bearing
DescriptionCodeFunction
1d Clamp for hoists1.840.005.400Removing front bearing
Refitting ( Removing ) 1. Fit the rear bearing (1a) using a hydraulic press, a suitable plate (1b) and the fitting tool (1c).
DescriptionCodeFunction
1c Extractor1.870.658.000Removing front bearing
1. Fit the front bearing (1a) using a hydraulic press, a suitable plate (1b) and the fitting tool (1c).
DescriptionCodeFunction
1c Extractor1.870.658.000Fitting front bearing