505867 - 1028H58 Small end bush (one) - Replace

Removing ( Refitting ) 1. Remove the bush (1a) from the small end using a hydraulic press, a suitable plate (1b) and the tool (1c) constructed as illustrated in the diagram.
DescriptionCodeFunction
1c Extractor/Fitting tool1.860.821.000Small end bush removal
Refitting ( Removing ) 1. Fit a new bush (1a) in the small end using a hydraulic press, a suitable plate (1b) and the tool (1c) constructed as illustrated in the diagram.
DescriptionCodeFunction
1c Extractor/Fitting tool1.860.821.000Small end bush removal
The bush should be fitted in the small end so that the lubrication port is aligned with the one in the small end.
- Ream the inner diameter of the small end bush to the recommended figure.
SubjectValue
.Small end bushmm
-Inner diameter20.006 - 20.014