1036C14 CAMSHAFTS IN CYLINDER HEAD - R.R. WITH HEAD REMOVED - Lancia - THESIS - eLearn

505944 - 1036C14 CAMSHAFTS in cylinder head - R.R. with head removed

) - Position the cylinder head (1a) in the vice using the tool (1b).

	Description	Code	Function
1b	Support	1.860.470.000	Cylinder head support

1. Undo the bolt (1a) for the exhaust side timing driven pulley using the tools (1b) and (1c) for counter-torque.

	Description	Code	Function
1b	Support for counter-torque	1.860.831.000	Loosen/tighten exhaust side camshaft drive pulley bolt

	Description	Code	Function
1c	Support for counter-torque	1.860.831.002	Loosen/tighten bolt fixing exhaust side driven timing pulley

2. Remove the exhaust side timing driven pulley.3. Undo the inlet side timing driven pulley bolts (3a) using the tool (3b) for counter-torque.

	Description	Code	Function
3b	Counter-torque	1.860.856.000	Loosen/tighten inlet side camshaft drive pulley bolts

4. Remove the inlet side timing driven pulley.5. Undo the bolts (5a) and remove the side timing belt guards (5b).

1. Undo the bolts fixing the cam angle sensor to the camshaft front cap.2. Undo the bolts (2a) and remove the camshaft caps (2b).3. Remove the inlet side camshaft front supper upper half-bearing.4. Remove the camshafts.5. Remove the camshaft front oil seals.6. Remove the inlet side camshaft front support lower half-bearing.

Refitting ( Removing

) - Place the inlet side camshaft front support lower half-bearing in its housing.- Place the camshafts in their housings.- Place the inlet side camshaft front support upper half-bearing in its housing.1. - Place the camshaft caps (1a) in their housings and secure them tightening the bolts (1b) to the recommended torque.

	Value - daNm	Fastening	Component	Ø
1b	1.4 - 2.0 (cylinder head side)	Bolt	CAMSHAFT CAPS	M7

- Tighten the bolt fixing the cam angle sensor to the camshaft front cap.

	Value - daNm	Fastening	Component	Ø
.	0.9 - 1.2	Bolt	CAM ANGLE SENSOR	-

1. Fit the exhaust side camshaft front oil seal (1a) using the tool (1b).

	Description	Code	Function
1b	Fitting tool	1.860.824.000	Fitting exhaust camshaft front oil seal

1. Fit the inlet side camshaft front oil seal (1a) using the tool (1b).

	Description	Code	Function
1b	Fitting tool	1.860.844.000	Fitting inlet camshaft front oil seal

1. Place the timing belt side guards (1a) back in their housings and secure them using the bolts (1b).

	Value - daNm	Fastening	Component	Ø
1b	0,9 - 1,2	Bolts	TIMING BELT PROTECTIVE COVER(S)

2. Place the inlet side timing driven pulley in its housing.3. Tighten the bolts (3a) for the inlet side toothed timing driven pulley using the tool (3b) for counter-torque.

	Value - daNm	Fastening	Component	Ø
3a	(inlet camshaft side) 0.9 - 0 1.2	Bolt	TIMING DUCT PULLEY	M6

	Description	Code	Function
3b	Counter-torque	1.860.856.000	Loosen/tighten inlet side camshaft drive pulley bolts

4. Place the exhaust side timing driven pulley in its housing.5. Tighten the bolt (5a) for the exhaust side toothed timing driven pulley using the tools (5b) and (5c) for counter-torque.

	Value - daNm	Fastening	Component	Ø
5a	(Exhaust camshaft side) 11.0 - 15.9	Bolt	TIMING DUCT PULLEY	M12

	Description	Code	Function
5b	Support for counter-torque	1.860.831.000	Loosen/tighten exhaust side camshaft drive pulley bolt

	Description	Code	Function
5c	Countertorque	1.860.848.000	Engine flywheel lock

- Remove the cylinder head from the vice and place it in the housing on the support tool.

	Description	Code	Function
.	Support	1.860.470.000	Cylinder head support