74714 - 1020A24 CRANKCASE SUMP - R.R. clean seals for sealant application with engine removed

Removing ( Refitting )     See in Op. 1004D40 ENGINE - Position on stand and Remove1. Undo the front and rear bolts (1b) fixing the crankcase sump using the spanner (1b).
DescriptionCodeFunction
1b Spanner1.860.834.000Loosen/tighten front and rear crankcase sump bolts
2. Undo the side bolts (2a) fixing the crankcase sump using the spanner (2b).
DescriptionCodeFunction
2b Spanner1.860.833.000Loosen/tighten crankcase sump side bolts
3. Cut the oil sump sealant using the tool.
DescriptionCodeFunction
3 Blade1.870.718.000Cut the crankcase sump sealant
4. Remove the crankcase sump.5. Remove the sump plug.
Refitting ( Removing ) - Clean the matching surfaces between the crankcase sump and the cylinder block/crankcase.- Apply silicon sealant to the entire perimeter of the crankcase sump.1. Place the crankcase sump back in its housing.2. Tighten the side bolts (2a) fixing the crankcase sump to the recommended torque using the spanner (2b).
Value - daNmFasteningComponentØ  
2a (Engine crankcase side) 0.9 - 1.2Side boltsOIL SUMPM6
DescriptionCodeFunction
2b Spanner1.860.833.000Loosen/tighten crankcase sump side bolts
3. Tighten the front and rear bolts (3a) fixing the crankcase sump to the recommended torque using the spanner (3b).
Value - daNmFasteningComponentØ  
3a (Engine crankcase side) 2.3 - 3.3Front and rear boltsOIL SUMPM8
DescriptionCodeFunction
3b Spanner1.860.834.000Loosen/tighten front and rear crankcase sump bolts
4. Place the plug in the housing and fasten it to the recommended torque.
Value - daNmFasteningComponentØ  
.1.8 - 2.7BoltENGINE OIL DRAIN PLUGM18
    See in Op. 1004D40 ENGINE - Position on stand and Remove