75094 - 1072C10 EXHAUST MANIFOLD - R.R. and Replace seal

Removing ( Refitting ) - Position the vehicle on a lift.- Disconnect the negative battery lead.    See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.    See in Op. 1048A28 vacuum air circuit resonator pipe - r+r    See in Op. 1048A21 AIR INLET HOSE FROM INTAKE TO FILTER - R.R.    See in Op. 1048A23 Cold AIR INTAKE for air filter - R.R.    See in Op. 1016A40 Ignition COIL COVER on cylinder head - R.R.    See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.1. Undo the fixing nuts (1a) and remove the bonnet lid lock (1b) from the housing in the crossmember.2. Undo the lower bolt (2a) and remove the lock reinforcement bracket (2b).
1. Undo the fixing nuts.2. Remove the front crossmember.
    See in Op. 1072C44 Exhaust manifold heat shield on BULKHEAD - R.R.1. Disconnect the band (1a), undo the bolt (1b) and extract the rigid engine coolant pipe (1c).
Collect the coolant that comes out in a suitable container.
1. Undo the nuts (1a) joining it to the cylinder head and the nuts (1b) joining it to the torque converter.2. Remove the exhaust manifold complete with gaskets.
Refitting ( Removing ) - Placed the exhaust manifold, complete with new gaskets, in its housing and connect it to the torque converter tightening the nuts to the recommended torque.
Value - daNmFasteningComponentØ  
.(to catalytic converter) 2.8NutEXHAUST MANIFOLD/SM8
- Tighten the nuts fixing the exhaust manifold to the cylinder head to the recommended torque.
Value - daNmFasteningComponentØ  
.2.5NutEXHAUST MANIFOLD/SM8
- Fit the rigid engine coolant pipe and secure it to the flexible hose using the bolt and the band.    See in Op. 1072C44 Exhaust manifold heat shield on BULKHEAD - R.R.- Fit the upper front crossmember.- Fit the bonnet lid lock, complete with reinforcement bracket, on the crossmember.    See in Op. 1016A40 Ignition COIL COVER on cylinder head - R.R.    See in Op. 1048A23 Cold AIR INTAKE for air filter - R.R.    See in Op. 1048A21 AIR INLET HOSE FROM INTAKE TO FILTER - R.R.    See in Op. 1048A28 vacuum air circuit resonator pipe - r+r- Connect the negative battery lead.    See in Op. 0010T20 Engine REFRIGERANT FLUID - Change- Raise the vehicle on the lift.    See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.    See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.- Remove the vehicle from the lift.