75225 - 1084A42 Engine oil pressure warning light SWITCH - R.R.

Removing ( Refitting ) - Position the vehicle on a lift.- Make sure that the ignition key is in the OFF position, then disconnect the negative battery terminal.    See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.1. Remove the air intake chamber mounting bracket (1a) acting on the bolt (1b) and the nut (1c).
1. Disconnect the electrical connection from the engine oil pressure warning light switch.
DescriptionConnector
1 Insufficient engine oil pressure sensorK030
2. Undo and remove the engine oil pressure warning light switch.
Refitting ( Removing ) - Position the engine oil pressure warning light switch and tighten it to the recommended torque.
Value - daNmFasteningComponentØ  
.3-INSUFFICIENT ENGINE OIL PRESSURE SWITCHM14 X 1.5
- Connect the electrical connection.
DescriptionConnector
.Insufficient engine oil pressure sensorK030
- Fit the intake chamber mounting bracket.    See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.- Connect the negative battery terminal.- Remove the vehicle from the lift.