75310 - 1088D14 UPPER radiator coolant inlet HOSE - R.R.

Removing ( Refitting ) - Position the vehicle on a lift.- Make sure that the ignition key is in the OFF position, then disconnect the negative battery terminal.    See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.    See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.     See in Op. 1048A28 vacuum air circuit resonator pipe - r+r    See in Op. 1048A21 AIR INLET HOSE FROM INTAKE TO FILTER - R.R. 1. Disconnect the upper radiator coolant inlet hose; collect the coolant that comes out in a suitable container.
Press the springs by hand and release the rapid connector to disconnect the hose from the radiator.
2. Disconnect the upper radiator coolant inlet hose from the thermostat, acting on the retaining band, and remove it.
Refitting ( Removing ) - Position the upper coolant inlet hose in its housing and connect it to the radiator using the rapid connector and to the thermostat using the retaining band.     See in Op. 1048A21 AIR INLET HOSE FROM INTAKE TO FILTER - R.R.    See in Op. 1048A28 vacuum air circuit resonator pipe - r+r     See in Op. 0010T21 ENGINE COOLANT - Check density and top up if necessary    See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.    See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.- Connect the negative battery lead.- Remove the vehicle from the lift.