Removing
(
Refitting
)
1. Undo the fixing bolt (1a) and move the wiring holder bracket (1b) to the side.2. Remove the one-way valve from the brake servo which is a press-fit.3. Disconnect the vacuum pipe from the housing on the modular intake manifold, then remove the pipe.
Refitting
(
Removing
)
- Fit the vacuum pipe in the housing on the modular intake manifold and secure it using the band.- Connect the one-way valve (which is a press-fit) to the brake servo.- Position the wiring holder bracket and tighten the fixing bolt.
Removing
(
Refitting
)
1. Undo the fixing bolt (1a) and move the wiring holder bracket (1b) to the side.2. Remove the one-way valve from the brake servo which is a press-fit.3. Disconnect the vacuum pipe from the housing on the modular intake manifold, then remove the pipe.