78675 - 3340B55 RIGID PIPE from hydraulic CONTROL UNIT to LEFT FRONT BRAKE - R.R.

Removing ( Refitting ) - Position the vehicle on a lift.    See in Op. 4450B02 Left FRONT WHEEL (one) - R.R.-1. Undo the connector (1a), remove the spring (1b) and release the flexible section from the rigid section of the brake pipe.
    See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.     See in Op. 1048A28 vacuum air circuit resonator pipe - r+r     See in Op. 3340A12 A.B.S. hydraulic and electronic CONTROL UNIT - R.R. - Includes bleeding air1. Working from the engine compartment, remove the rigid pipe from the electro-hydraulic control unit to the left front brake without damaging it.
Refitting ( Removing ) - Working from the engine compartment, fit the rigid pipe from the electro-hydraulic control unit to the left front brake without bending or damaging it.     See in Op. 3340A12 A.B.S. hydraulic and electronic CONTROL UNIT - R.R. - Includes bleeding air     See in Op. 1048A28 vacuum air circuit resonator pipe - r+r- Connect the flexible section to the rigid section of the brake pipe.- Tighten the connector joining the rigid section to the flexible section to torque.
Value - daNmFasteningComponentØ  
.1.4ConnectorBRAKING SYSTEM PIPE BRAKESM10
    See in Op. 0010T64 Brake and/or clutch fluid - Check level and top up, if necessary-    See in Op. 0010T65 HYDRAULIC BRAKING SYSTEM - BLEED AIR-    See in Op. 4450B02 Left FRONT WHEEL (one) - R.R.-- Remove the vehicle from the lift.