4110B10 STEERING RODS - R.R. ON VEHICLE - CHECK TOE IN SEPARATELY - Lancia - THESIS - eLearn

78745 - 4110B10 Steering RODS - R.R. on vehicle - Check toe in separately

) - Position the vehicle on the lift. See in Op. 4450B12 Front WHEELS (two) - R.R.- Measure the length of the steering rods to be used in the refitting.1. Loosen the nuts securing the steering rods.2. Undo the nuts fixing the track rod end to the steering knuckle.3. Separate the track rod end (3b) from the steering knuckle using the tool (3a).

	Description	Code	Function
3a	Head extraction	1.847.038.000	Head extraction

- Undo the rods from the steering box and remove them

Refitting ( Removing

) - Fit the steering box steering rods and tighten them to torque.

	Value - daNm	Fastening	Component	Ø
.	5	Locknut	ADJUSTABLE LINK BALL JOINTS	M14x.5

- Check that the length of the adjustable steering rods is the same as measured during the removal.- Connect the steering track rod ends to the steering knuckles and tighten the fixing nut to torque.

	Value - daNm	Fastening	Component	Ø
.	4.5	Nut	ADJUSTABLE LINK BALL JOINTS	M10 x 1.25

See in Op. 4450B12 Front WHEELS (two) - R.R.- Lower the lift and remove the vehicle