846478 - 2135A16 AUTOMATIC TRANSMISSION LEVER GRIP - R.R.
Removing
(
Refitting
)
1. Rremove the trim (1a) releasing the retaining clips (1b) from the housings on the grip.2. Lower the metal trim located under the gear lever grip.
1. Extract the retaining pin (1a) acting on the special reference (1b).2. Extract the grip (2a) from the gear lever (2b) pulling it upwards.
Refitting
(
Removing
)
- Position the grip on the gear lever fitting it properly so that the opening in the grip is aligned with the opening in the gear lever.- Insert the retaining pin via the opening in the grip.- Lift the metal trim until it is against the gear lever grip.- Position the trim on the gear lever grip.
Removing
(
Refitting
)
1. Rremove the trim (1a) releasing the retaining clips (1b) from the housings on the grip.2. Lower the metal trim located under the gear lever grip.
