90145 - 1020A46 Crankcase oil sump BULKHEAD - R.R. with crankcase sump removed

Removing ( Refitting ) 1. Undo the fixing bolts (1a) and remove the sump bulkhead (1b) fastened to the oil sump.
Refitting ( Removing ) - Fit the bulkhead and tighten the bolts fixing it to the engine oil sump. Removing ( Refitting ) 1. Undo the bolts (1a) and remove the crankcase oil sump partition (1b).
Refitting ( Removing ) - Place the crankcase oil sump partition back in its housing and secure it tightening the bolts to the recommended torque.
Value - daNmFasteningComponentØ  
.0,9 - 1,2BoltOIL BULK HEADM6