91869 - 1036C40 VARIABLE VALVE TIMING on inlet camshaft in cylinder head - R&R with shaft removed
Removing
(
Refitting
)
- Position the inlet side camshaft in a vice fitted with protective jaws.1. Remove the phase transformer (1a) from the inlet side camshaft using the tool (1b). | Description | Code | Function |
|---|---|---|---|
| 1b | Spanner | 1.852.161.000 | Removing phase transformer from inlet side camshaft |
Refitting
(
Removing
)
- Apply Loctite 270 to the 3rd thread of the phase transformer taking care not to block the oil ducts.- Fit the phase transformer on the inlet side camshaft and tighten it to the recommended torque using the tool. | wait for 2 hours before fitting the shaft on the head. |
| Description | Code | Function |
|---|---|---|---|
| . | Spanner | 1.852.161.000 | Removing phase transformer from inlet side camshaft |
 | Value - daNm | Fastening | Component | Ø |
|---|---|---|---|---|
| . | 2,4 - 3,1 | Bolt | TIMING VARIATOR | - |
Removing
(
Refitting
)
- Position the inlet side camshaft in a vice with jaw covers.1. Remove the phase transformer (1a) from the inlet side camshaft using the tool (1b). | Description | Code | Function |
|---|---|---|---|
| 1b | Spanner | 1.852.161.000 | Fitting-removing phase transformer on camshaft |
Refitting
(
Removing
)
- Apply adhesive to the thread of the phase transformer taking care not to block the oil ducts.- Fit the phase transformer on the inlet side camshaft and tighten it using the special tool. | Description | Code | Function |
|---|---|---|---|
| . | Spanner | 1.852.161.000 | Fitting-removing phase transformer on camshaft |