93952 - 1080B95 REAR LAMBDA SENSOR - R.R.

Removing ( Refitting ) - Open the boot and disconnect the negative battery terminal.    See in Op. 1048A21 AIR INLET HOSE FROM INTAKE TO FILTER - R.R.1. Disconnect the electrical connection for the rear Lambda sensor.
DescriptionConnector
1 Lambda sensor on catalyzer 2K018
2. Undo and remove the rear Lambda sensor.
Refitting ( Removing ) - Position the rear Lambda sensor in its housing and tighten it to the recommended torque.
Value - daNmFasteningComponentØ  
.4.5-LAMBDA PROBE (ONE)M18 X 1.5
- Connect the electrical connection for the rear Lambda sensor.
DescriptionConnector
.Lambda sensor on catalyzer 2K018
    See in Op. 1048A21 AIR INLET HOSE FROM INTAKE TO FILTER - R.R.- Connect the negative battery lead.