95329 - 1084C10 Engine oil heat exchanger - R.R.
Removing ( Refitting ) - Position the vehicle on a lift.- Open the boot, remove the cover on the left hand side and disconnect the negative battery lead. See in Op. 7055B54 PROTECTION/GUARD under engine - R.R. See in Op. 1084B30 CARTRIDGE ENGINE OIL FILTER -R.R.1. Undo the bolts fixing the coolant pipe mounting brackets to the crankcase.
1. Loosen the bands and disconnect the heat exchanger coolant supply and return pipes.
Collect the coolant that comes out in a suitable container. |
1. Undo the connector (1a) and remove the engine oil heat exchanger (1b).
Refitting
(
Removing
)
- Position the engine oil heat exchanger and secure it using the connector.- Connect the coolant supply and return pipes to the heat exchanger and secure them using the bands.- Tighten the bolts fixing the coolant mounting brackets to the crankcase. See in Op. 1084B30 CARTRIDGE ENGINE OIL FILTER -R.R.- [0010T11] See in Op. 0010T21 ENGINE COOLANT - Check density and top up if necessary- See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.- Connect the negative battery lead.- Remove the vehicle from the lift.