95441 - 1088C14 WATER PUMP - R.R. REFITTING WITH TIMING BELT REMOVED

Removing ( Refitting ) 1. Undo the bolt (1a) for the exhaust side timing driven pulley using the tools (1b) and (1c) for counter-torque.

	Description	Code	Function
1b	Support for counter-torque	1.860.831.000	Loosen/tighten exhaust side camshaft drive pulley bolt

	Description	Code	Function
1c	Spanner for rotating timing pullies	1.860.831.002	Loosen/tighten camshaft drive pulley bolt

2. Undo the bolts (2a) for the inlet side timing driven puley using the tool (2b) for counter-torque.

	Description	Code	Function
2b	Counter-torque	1.860.856.000	Loosen/tighten inlet side camshaft drive pulley bolts

3. Remove the inlet side timing driven pulley (3a) and the exhaust side timing driven pulley (3b). 1. Undo the fixing bolts (1a) and remove the guard (1b). 1. Undo the bolts (1a) and remove the water pump (1b) complete with O-ring. Refitting ( Removing ) - Position the water pump, complete with O-ring, in its housing and secure it tightening the bolts to the recommended torque.

	Value - daNm	Fastening	Component	Ø
.	2.5	Bolt	COOLANT PUMP	M8

- Fit the guard and secure it using the bolts.- Position the timing driven pullies (inlet side and exhaust side) in their housings.- Screw in the bolts fixing the timing driven pullies without tightening them.

The bolts fixing the timing driven pullies are tightened when the timing drive belt is refitted.