95869 - 1088D22 WATER PUMP INLET CONNECTOR - R.R.

Refitting

- Raise the vehicle on the lift.    See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.- Position a suitable container for collecting the engine coolant.1. Disconnect the lower radiator pipe.

    See in Op. 1048A21 AIR INLET HOSE FROM INTAKE TO FILTER - R.R.    See in Op. 1048A23 Cold AIR INTAKE for air filter - R.R.    See in Op. 1016A40 Ignition COIL COVER on cylinder head - R.R.    See in Op. 1072C44 Exhaust manifold heat shield on BULKHEAD - R.R.1. Undo the fixing nuts (1a) and remove the bonnet lock (1b) from the housing in the crossmember.2. Undo the lower bolt (2a) and remove the lock reinforcement bracket (2b).

1. Undo the retaining nuts.- Remove the front crossmember.

1. Undo the bolt (1a) and extract the rigid pipe (1b) from the connector.2. Disconnect the pipes from the coolant inlet connector to the water pump.

1. Undo the fixing bolts (1a) and remove the water pump inlet connector (1b).2. Save the gasket underneath.

Refitting ( Removing ) - Position the water pump inlet connector, complete with gasket, and secure it using the bolts.- Connect the coolant pipes to the connector and secure them using the bands.- Fit the rigid coolant pipe on the connector and secure it using the bolt.- Fit the upper front crossmember.- Fit the bonnet lock on the crossmember complete with reinforcement bracket.- Connect the lower radiator pipe.    See in Op. 1072C44 Exhaust manifold heat shield on BULKHEAD - R.R.    See in Op. 1016A40 Ignition COIL COVER on cylinder head - R.R.    See in Op. 1048A23 Cold AIR INTAKE for air filter - R.R.    See in Op. 1048A21 AIR INLET HOSE FROM INTAKE TO FILTER - R.R.    See in Op. 0010T20 Engine REFRIGERANT FLUID - Change    See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.- Connect the negative battery lead, then close the boot.    See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.- Remove the vehicle from the lift.