1088D47 COOLANT SUPPLY AND RETURN HOSES TO ENGINE OIL HEAT EXCHANGER - R.R. - Lancia - THESIS - eLearn

95981 - 1088D47 COOLANT SUPPLY AND RETURN HOSES TO ENGINE OIL HEAT EXCHANGER - R.R.

) - Position the vehicle on a lift.- Open the boot, remove the cover on the left hand side and disconnect the negative battery lead. See in Op. 7055B54 PROTECTION/GUARD under engine - R.R. See in Op. 1084B30 CARTRIDGE ENGINE OIL FILTER -R.R.1. Disconnec the band (1a) on the connector for the water pump and the band (1b) on the heat exchanger, then remove the return pipe.

1. Undo the bolts fixing the coolant pipe mounting brackets to the crankcase.2. Loosen the band (2a) on the thermostat and the band (2b) on the heat exchanger, then remove the supply pipe (2c).

Collect the coolant that comes out in a suitable container.

Refitting ( Removing

) - Position the supply pipe on the thermostat and on the heat exchanger, then secure the pipe using the bands.- Fasten the pipe to the crankcase using the bolts.

	Value - daNm	Fastening	Component	Ø
.	5	Bolt	HEAT EXCHANGER COOLANT DELIVERY SLEEVE	M12 X 1.25

	Value - daNm	Fastening	Component	Ø
.	2.5	Bolt	HEAT EXCHANGER COOLANT DELIVERY SLEEVE	M8

- Position the return pipe on the water pump connector and on the heat exchanger, then secure the pipe using the bands. See in Op. 1084B30 CARTRIDGE ENGINE OIL FILTER -R.R.- [0010T11] See in Op. 0010T20 Engine REFRIGERANT FLUID - Change See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.- Connect the negative battery lead.- Remove the vehicle from the lift.