145780 - 5505B50 Boot lid integrated wiring - R.R. with inner lining removed
Removing
(
Refitting
)
1. Release the protection for the boot lid hinge and remove it.
 | Description | Connector |
|---|---|---|
| 1 | Rear/boot coupling | D040 |
| Description | Connector |
|---|---|---|
| 1 | Left rear light cluster (moving section on boot lid) | F035 |
| Description | Connector |
|---|---|---|
| 1 | Boot aerial | P013 |
| Description | Connector |
|---|---|---|
| 1 | Right rear light cluster (moving section on boot lid) | F036 |
| Description | Connector |
|---|---|---|
| 1 | Boot lock geared motor | N057 |
Refitting
(
Removing
)
- Check that the wiring is not damaged and that the individual conducts are correctly fastened to the connections.- If necessary, carry out continuity tests.- Position the integrated boot lid wiring in place and secure it to the retaining springs.- Connect the electrical connectors. | Description | Connector |
|---|---|---|
| Rear/boot coupling | D040 |
| Description | Connector |
|---|---|---|
| Left rear light cluster (moving section on boot lid) | F035 |
| Description | Connector |
|---|---|---|
| Boot aerial | P013 |
| Description | Connector |
|---|---|---|
| Right rear light cluster (moving section on boot lid) | F036 |
| Description | Connector |
|---|---|---|
| Boot lock geared motor | N057 |