| STEP | OPERATIONS TO BE CARRIED OUT | TEST RESULTS | 
|---|
| 1 | CHECK USING DIAGNOSTIC EQUIPMENT | ALL OK | PROBLEMS ENCOUNTERED | ACTION | 
|---|
|  | Connect the diagnostic equipment (Examiner or Examiner plus) to the diagnostic socket: that there are no errors in the luggage compartment node control unitthe operation of the electric window concerned through active diagnosis
 |  | 1. Presence of errors in the luggage compartment node control unit | 1. Continue following the instructions in the diagnostic table | 
| 2. Electric window not activated | Move on to Step | 
| 2 | ELECTRICAL SYSTEM CHECK (ELECTRIC WINDOW MOTOR SUPPLY) | ALL OK | PROBLEMS ENCOUNTERED | ACTION | 
|---|
|  | Check: The condition of the specific fuse in the dashboard junction unitthe condition of the connection between the door node concerned and the electric window motor (Wiring Diagram    )  E3051  ELECTRIC REAR WINDOWS 
 | Move on to Step | 1. fuse damaged | 1. Replace the fuse | 
| 2. Connections interrupted | 2. Restore the connections (Wiring Diagram    )  E3051  ELECTRIC REAR WINDOWS | 
| 3 | ELECTRIC WINDOW CHECK | ALL OK | PROBLEMS ENCOUNTERED | ACTION | 
|---|
|  | Check the mechanical condition and impediments for the electric window. | Move on to Step | 1. Electric window device faulty | 1. Replace the window opening device    See in Op.   7010M21  Left or right rear door electric WINDOW - R.R. | 
| 2. Impediments found | 2. Remove the obstacle and check correct operation | 
| 4 | CHECK ON CORRECT OPERATION | ALL OK | PROBLEMS ENCOUNTERED | ACTION | 
|---|
|  | Check that the fault is no longer present |  |  |  |