257120 - 1060G38 Switch on brake pedal - R.R.

Removing ( Refitting ) - Disconnect the negative battery terminal.1. Undo the fixing bolts.2. Remove the trim under the dashboard, driver's side. 1. Disconnect the electrical connection for the brake pedal switch.

	Description	Connector
.	Switch on brake pedal	I030

2. Undo and remove the switch from the brake pedal. Refitting ( Removing ) - Position the brake pedal in the end of travel position.- Fit the switch on the bracket rotating it about 60° in a clockwise direction until the attachment to the bracket can be heard.- Release the brake pedal so that the brake servo push rod is in the rest position.

Check that the brake switch is correctly positioned (fully retracted); if it is not, the brake pedal could be operated which would cause the brakes to lock.

- Carry out a complete brake pedal stroke so that the switch beds into the housing.- Check that there is clearance between the bracket on the pedal and the switch.- Connect the electrical connection.

	Description	Connector
.	Switch on brake pedal	I030

- Fit the trim under the dashboard, driver's side.- Connect the negative battery terminal.