D71 THE CRUISE CONTROL SYSTEM RECALL CONTROL IS NOT WORKING - Lancia - THESIS - eLearn

341500 - D71 THE CRUISE CONTROL SYSTEM RECALL CONTROL IS NOT WORKING

The Cruise Control system is not reactivated when the recall button is pressed.

STEP	OPERATIONS TO BE CARRIED OUT	TEST RESULTS
1	CHECK USING DIAGNOSTIC EQUIPMENT	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Connect the diagnostic test equipment (Examiner or other instruments) to the tester input.Check for the presence of faults in the engine management control unit	Move on to Step	1. Error detected in the control unit	1. Continue following the instructions for the diagnostic equipment
		Move on to Step	2. No communication with the control unit	2. Restore the connection between the engine management control unit and the diagnostic connector (Wiring Diagram ) E5060 CRUISE CONTROL
2	SELECTOR CONTROL CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check that the Cruise Control system control contacts are working properly in the recall position Continue following the instructions in the test 5580AC Cruise Control RECALL control check	Move on to Step	No continuity	Replace the steering column switch unit lever with the Cruise Control incorporated See in Op. 5580A10 Cruise control LEVER ASSEMBLY - R.R.
3	SUPPLY CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	With the ignition key in the ON position and the Cruise Control ON, check that there is a voltage signal from the Cruise Control to the engine management control unit when the recall button is pressed; (Wiring Diagram ) E5060 CRUISE CONTROL	Move on to Step	No voltage detected	Repair the connections (Wiring Diagram ) E5060 CRUISE CONTROL
4	CHECK ON CORRECT OPERATION	ALL OK	PROBLEMS ENCOUNTERED	ACTION
2.4 20 V,2.0 TB,3.0 V6	Check that the fault is no longer present		Fault persists control unit defective	Replace the engine management control unit See in Op. 1056B82 Injection/ignition system CONTROL UNIT (one) - R.R.
4	CHECK ON CORRECT OPERATION	ALL OK	PROBLEMS ENCOUNTERED	ACTION
2.4 JTD 10V	Check that the fault is no longer present		Fault persists control unit defective	Replace the engine management control unit See in Op. 1060G80 Diesel electronic injection system CONTROL UNIT - R.R.