| STEP | OPERATIONS TO BE CARRIED OUT | TEST RESULTS | 
|---|
| 1 | CHECK USING DIAGNOSTIC EQUIPMENT. | ALL OK | PROBLEMS ENCOUNTERED | ACTION | 
|---|
|  | Connect the Examiner diagnostic equipment to the diagnostic socket and check the following at the Body Computer Node: | Move on to Step | left front side light errorright front side light errorright rear side light errorleft rear side light error
 | Move on to Step | 
| 2 | ELECTRICAL SYSTEM CHECK. | ALL OK | PROBLEMS ENCOUNTERED | ACTION | 
|---|
|  | Check the condition of the bulbsCheck the continuity and the insulation of the wiring for the front and rear side lights (Wiring Diagram    )  E2010  SIDE LIGHTS/NUMBER PLATE LIGHT 
 | Move on to Step | 1. Bulbs burnt out | 1. Replace the bulbs | 
| 2. Connections broken/short circuited | 2. Restore the electrical connection (Wiring Diagram    )  E2010  SIDE LIGHTS/NUMBER PLATE LIGHT | 
| 3 | CHECK USING DIAGNOSTIC EQUIPMENT. | ALL OK | PROBLEMS ENCOUNTERED | ACTION | 
|---|
|  | Keeping the Examiner diagnostic equipment connected, check the operation of the number plate lights in active diagnosis | Move on to Step | None of the side lights come on | Replace body computer    See in Op.   5505A32  BODY COMPUTER - R.R. | 
| 4 | CHECK ON CORRECT OPERATION | ALL OK | PROBLEMS ENCOUNTERED | ACTION | 
|---|
|  | Check that the fault is no longer present |  |  |  |