368014 - J47 RIGHT DOOR MIRROR DOES NOT FOLD IN OPEN/CLOSED POSITION

the external rear view mirrors are controlled directly by the Door Nodes according to information received from the joystick on the left front door handle.the mirror folding information for the Driver's Door Node is direct, whilst for the Passenger Dor Node the information is made available by the Driver's Door Node via the B-CAN.

STEP	OPERATIONS TO BE CARRIED OUT	TEST RESULTS
1	CHECK USING DIAGNOSTIC EQUIPMENT	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Connect the Examiner diagnostic equipment to the diagnostic connect and check the following at the Passenger Door Node: In errors ambient that there are no faults In active diagnosis ambient the operation of the mirror folding motor	Move on to Step	1. Presence of faults	1. Continue following the instructions in the diagnostic table
			2. Mirror folding motor not working	Move on to Step
2	ELECTRICAL SYSTEM CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Remove the door panel and check: the continuity between the electric mirror connector and the Passenger Door Node the presence of a positive control at the mirror folding selector (Wiring Diagram ) E3032 EXTERIOR MIRRORS ADJUSTMENT	Move on to Step	1. Electrical connection faulty	1. Restore the electrical connection (Wiring Diagram ) E3032 EXTERIOR MIRRORS ADJUSTMENT
			2. No positive control	2. Replace the Passenger Door Node
3	CHECK ON CORRECT OPERATION	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check that the fault is no longer present		Fault persists	Replace the rear view mirror    See in Op. 7005R30 ELECTRICALLY operated DOOR MIRROR (one) - R.R.