1008A42 POWER UNIT RIGID MOUNT - GEARBOX SIDE - R&R - Lancia - THESIS - eLearn

74601 - 1008A42 Power unit RIGID MOUNT - GEARBOX side - R&R

) - Position the vehicle on a lift. See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.- Lower the lift. See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R. See in Op. 1048A28 vacuum air circuit resonator pipe - r+r - Position the hydraulic power unit support under the bellhousing in order to work safely.1. Undo the bolts fixing the rigid support to the gearbox.2. Undo the pin connecting the rigid support to the flexible mounting.3. Remove the gearbox side rigid engine support.

Refitting ( Removing

) - Position the gearbox side rigid engine support.- Fasten the pin joining the rigid support to the flexible mounting using the nut, tightening it to the recommended torque.

	Value - daNm	Fastening	Component	Ø
.	(on flexible mounting) 5	Bolt	POWER UNIT GEAR BOX END RIGID MOUNT	M10 X 1.25

- Slightly raise the hydraulic lift and tighten the bolts fixing the rigid support to the bellhousing.

	Value - daNm	Fastening	Component	Ø
.	(on gearbox) 5	Bolt	POWER UNIT GEAR BOX END RIGID MOUNT	M10 X 1.25

- Remove the hydraulic lift. See in Op. 1048A28 vacuum air circuit resonator pipe - r+r See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.- Raise the vehicle on the lift. See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.- Lower the vehicle and remove it from the lift.