75097 - 1072C44 Exhaust manifold heat shield on BULKHEAD - R.R.

Refitting

    See in Op. 1048A28 vacuum air circuit resonator pipe - r+r    See in Op. 1048A21 AIR INLET HOSE FROM INTAKE TO FILTER - R.R.    See in Op. 1048A23 Cold AIR INTAKE for air filter - R.R.    See in Op. 1016A40 Ignition COIL COVER on cylinder head - R.R.1. Undo the lower nuts fixing the heat shield bulkhead.2. Undo the bolt (2a) and the nut (2b), then extract the heat shield bulkhead (2c) upwards.

Refitting ( Removing ) - Position the heat shield bulkhead.- Tighten the bolt and the nuts fixing the heat shield bulkhead.    See in Op. 1016A40 Ignition COIL COVER on cylinder head - R.R.    See in Op. 1048A23 Cold AIR INTAKE for air filter - R.R.    See in Op. 1048A21 AIR INLET HOSE FROM INTAKE TO FILTER - R.R.    See in Op. 1048A28 vacuum air circuit resonator pipe - r+r    See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.- Connect the negative battery lead.