79947 - 7005N20 Central locking MOTOR/LOCK ASSEMBLY for one front door, left or right - R.R. with door panel and support frame removed

Removing ( Refitting ) - [7005E04]1. Undo the fixing bolts.2. Release the inner handle door opening control cable from the retaining springs.3. Disconnect the electrical connections.
DescriptionConnector
3 Right front door lock geared motorN051A
DescriptionConnector
3 Right front door lock geared motorN051B
4. Disconnect the door opening idler (4a) from the handle, geared motor side and the door opening/closing idler (4b) from the lock barrel, key lock barrel side.5. Remove the front door lock geared motor.
Refitting ( Removing ) 1. Fit the front door lock geared motor in the housing.2. Connect the door opening idler (2a) from the handle, geared motor side and the door opening/closing idler (2b) from the lock barrel, key lock barrel side.3. Connect the electrical connections.
DescriptionConnector
3 Right front door lock geared motorN051A
DescriptionConnector
3 Right front door lock geared motorN051B
4. Secure the inner handle door opening control cable to the retaining springs.5. Tighten the bolts fixing the front door lock geared motor to torque.
Value - daNmFasteningComponentØ  
5 1.4BoltFRONT DOOR LOCK MOTORM8
- Connect the negative battery terminal.- Check the operation of the switch unit.- [7005E04]