93788 - 1072B54 HOSES CONNECTING AIR CHAMBER TO INTAKE MANIFOLD(S) - R.R.

Refitting

    See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.    See in Op. 1016A40 Ignition COIL COVER on cylinder head - R.R.    See in Op. 1048A28 vacuum air circuit resonator pipe - r+r    See in Op. 1048A48 HOSE BETWEEN RESONATOR AND THROTTLE CASING - R.R.    See in Op. 1056B82 Injection/ignition system CONTROL UNIT (one) - R.R.    See in Op. 1056B14 THROTTLE CASING - R.R.    See in Op. 1056B87 INJECTION/IGNITION CONTROL UNIT MOUNTING - R.R.    See in Op. 1072B10 INTAKE MANIFOLD - R.R. and Replace gasket- Move the device (V.I.S.) with the air ducts away from the hoses.1. Loosen the bands and remove the hoses connecting the air chamber to the intake manifold.

Refitting ( Removing ) - Position the hoses connecting the air chamber to the intake manifold in their housings and secure them using the bands.    See in Op. 1072B10 INTAKE MANIFOLD - R.R. and Replace gasket- Place the device (V.I.S.) with the air ducts back in its housing.    See in Op. 1056B87 INJECTION/IGNITION CONTROL UNIT MOUNTING - R.R.    See in Op. 1056B14 THROTTLE CASING - R.R.    See in Op. 1056B82 Injection/ignition system CONTROL UNIT (one) - R.R.    See in Op. 1048A48 HOSE BETWEEN RESONATOR AND THROTTLE CASING - R.R.    See in Op. 1048A28 vacuum air circuit resonator pipe - r+r    See in Op. 1016A40 Ignition COIL COVER on cylinder head - R.R.    See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.    See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.- Connect the negative battery lead, then close the boot.- Remove the vehicle from the lift.