1072D50 DEVICE (V.I.S.) WITH ADJUSTABLE AIR DUCTS - R.R. - Lancia - THESIS - eLearn

93863 - 1072D50 DEVICE (V.I.S.) with adjustable air ducts - R.R.

) - Position the vehicle on a lift.- Open the boot, remove the cover on the left hand side and disconnect the negative batttery lead.- Raise the vehicle on the lift. See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R. See in Op. 7055B54 PROTECTION/GUARD under engine - R.R. See in Op. 1016A40 Ignition COIL COVER on cylinder head - R.R. See in Op. 1048A28 vacuum air circuit resonator pipe - r+r See in Op. 1048A48 HOSE BETWEEN RESONATOR AND THROTTLE CASING - R.R. See in Op. 1056B82 Injection/ignition system CONTROL UNIT (one) - R.R. See in Op. 1056B14 THROTTLE CASING - R.R. See in Op. 1056B87 INJECTION/IGNITION CONTROL UNIT MOUNTING - R.R. See in Op. 1072B10 INTAKE MANIFOLD - R.R. and Replace gasket1. Disconnect the electrical connections for the V.I.S. control actuator enablement solenoid valve (1a) and for the fuel vapour recovery solenoid valve (1b).

	Description	Connector
1a	Variable geometry solenoid valve	L015

	Description	Connector
1b	Fuel vapour recovery solenoid valve	L010

2. Remove the (V.I.S.) device with adjustable air ducts.

Refitting ( Removing

) - Position the (V.I.S.) device with adjustable air ducts in the engine compartment.- Connect the electrical connections for the V.I.S. control actuator enablement solenoid valve and for the fuel vapour recovery solenoid valve.

	Description	Connector
.	Variable geometry solenoid valve	L015

	Description	Connector
.	Fuel vapour recovery solenoid valve	L010

See in Op. 1072B10 INTAKE MANIFOLD - R.R. and Replace gasket See in Op. 1056B87 INJECTION/IGNITION CONTROL UNIT MOUNTING - R.R. See in Op. 1056B14 THROTTLE CASING - R.R. See in Op. 1056B82 Injection/ignition system CONTROL UNIT (one) - R.R. See in Op. 1048A48 HOSE BETWEEN RESONATOR AND THROTTLE CASING - R.R. See in Op. 1048A28 vacuum air circuit resonator pipe - r+r See in Op. 1016A40 Ignition COIL COVER on cylinder head - R.R. See in Op. 7055B54 PROTECTION/GUARD under engine - R.R. See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.- Connect the negative battery lead, then close the boot.- Remove the vehicle from the lift.